User Manual Instruction Manual

Rockwell Automation Publication 2080-UM001D-EN-E - September 2012 47
Specifications Appendix A
Analog Inputs (2080-LC10-12QWB, 2080-LC10-12QBB, 2080-LC10-12DWD)
(Inputs 4…7)
Attribute Value
Input type DC voltage
Input voltage range 0…10V DC
Input voltage, max 26.4V DC
Value of LSB 10 mV
Input resolution 10-bit
Input data count range 0…1023
Smoothing None, smoothing
Overall accuracy 5% of full-scale (2% with calibration)
(25…55 °C)
(77…131 °F)
Noise rejection 50/60 Hz
Common mode rejection 40 dB, DC to 60 Hz with smoothing filter
Nominal impedance 14.1 kΩ (non-isolated)
DC Output (2080-LC10-12QBB)
Attribute Value
User supply voltage, min 10V DC
User supply voltage, max 26.4V DC
On-state voltage drop 1V @ max load current
2.5V @ max surge current
Current ratings (each point) 0.5 A @ 55 °C, max
1.0 A @ 30 °C, max
1.0 mA, min
Surge current, peak 4.0 A
Surge current, max duration 10 ms
Controller current 3 A
Turn-on- time, max 0.1 ms
Turn-off time, max 1.0 ms
Relay Outputs (2080-LC10-12AWA, 2080-LC10-12QWB, 2080-LC10-12DWD)
Attribute Value
Output rating Relay 00 & 01: 8 A @ 240V AC, 5 A @ 24V DC, B300, R300
Relay 02 & 03: 4 A @ 240V AC, 2 A @ 24V DC, C300, R150
Voltage, min 5V AC/DC
Voltage, max 250V AC, 30V DC @ rated current.
See details on page 48
.
Turn on time 15 ms
Turn off time 5 ms