Owner manual

16 Rockwell Automation Publication 20HIM-UM001D-EN-P - February 2013
Chapter 2 Installing the HIM
Using Drive Port 2 Connection for Hand-Held Operation
PowerFlex 750-Series Drive
Attach a 20-HIM-H10 cable to the bottom of the HIM. Then plug the other end
of the cable into Port 2 near the bottom of the drive control pod.
PowerFlex 7-Class Drive
Attach a 20-HIM-H10 cable to the bottom of the HIM. Then plug the other end
of the cable into Port 2 on the bottom of the drive.
PE
PE
20-HIM-A6 HIM
20-HIM-H10 Cable
(1 m/3.28 ft. long)
Port 2
(PowerFlex 755 drive
shown with cover
removed)
Port 2
(PowerFlex 70
drive shown)
20-HIM-A6 HIM
20-HIM-H10 Cable
(1 m/3.28 ft. long)