User Manual

Appendix B
Adapter Parameters
Appendix B provides information about the RS-485 DF1 adapter
parameters.
The parameters in the adapter are numbered consecutively. However,
depending on which configuration tool you use, they may have different
numbers.
Topic Page
About P
arameter Numbers B-1
Parameter List B-1
About Parameter Numbers
Configuration Tool Numbering Scheme
• DriveExplorer
• DriveExecutive
• HIM
The adapter parameters begin with parameter 1. For
example, Parameter 01 - [DPI Port] is parameter 1 as
indicated by this manual.
Parameter List
Parameter
No. Name and Description Details
01 [DPI Port]
Port to which the adapter is connected. This will
usually be port 5.
Default: 0
Minimum: 0
Maximum: 7
Type: Read Only
02 [DPI Data Rate]
Data rate used by the drive. This data rate is set in
the drive, and the adapter detects it.
Default: 0 = 125 kbps
Values: 0 = 125 kbps
1 = 500 kbps
Type: Read Only
03 [DF1 Addr Cfg]
Node address if the Data Rate switch is set to
“PGM” (Program).
Default: 1
Minimum: 0
Maximum: 254
Type: Read/Write
Reset Required: Yes
04 [DF1 Addr Actual]
DF1 node address actually used by the adapter.
Default: 1
Minimum: 0
Maximum: 254
Type: Read Only