User Manual

Chapter 3
Configuring the Adapter
Chapter 3 provides instructions and information for setting the
parameters in the adapter.
For a list of parameters, refer to Appendix
B, Adapter Parameters. For
definitions of terms in this chapter, refer to the Glossary
.
The RS-485 DF1 adapter stores parameters and other information in its
own non-volatile memory. You must, therefore, access the adapter to
view and edit its parameters. The following tools can be used to access
the adapter parameters:
Topic Page Topic Page
Confi
guration Tools 3-1 Setting a Fault Action 3-5
Using the PowerFlex HIM 3-3 Resetting the Adapter 3-7
Setting the Node Address 3-4 Viewing the Adapter Configuration 3-8
Setting the Data Rate 3-4
Configuration Tools
Tool Refer To:
DriveExplorer Software (version 2.02
or higher)
DriveExplorer Getting Results Manual,
Publication 9306-5.3, or the online help
DriveExecutive Software (version 1.01
or higher)
DriveTools 2000 Online Help
PowerFlex HIM page 3-3