User Manual

Using the I/O 5-23
20-COMM-C/Q ControlNet Adapter User Manual
Publication 20COMM-UM003F-EN-P
PLC-5 Controller Example
Creating an RSLogix 5 Project, Version 7.00 or Later
To transmit (read and write) data between the controller and drive, you must
create discrete I/O instructions in the controller for Logic Command/Status,
Reference/Feedback, and Datalinks.
1. Start RSLogix 5 software.
The RSLogix 5 window appears.
2. Select File > New to display the Select Processor Type screen.
3. Assign a name for the processor.
4. From the pull-down menus, choose the appropriate choices to match
your PLC-5 controller and application.
5. Click OK.
The Select ControlNet Project screen appears.
6. Click Browse… and choose the RSNetWorx for ControlNet project file
created in Chapter
4.
7. Enter the node address of the controller in the ControlNet Node field.
8. Click OK.
The RSLogix 5 project window appears.