User guide

Chapter
3
Configuring the Adapter
Chapter 3 provides instructions and information for setting the
parameters in the adapter.
For a complete list of parameters, refer to Appendix B, Adapter
Parameters. For definitions of terms in this chapter, refer to the Glossary.
The PROFIBUS adapter stores parameters and other information in its
own non-volatile memory. You must, therefore, access the adapter to
view and edit its parameters. The following tools can be used to access
the adapter parameters:
Topic Page Topic Page
Configuration Tools
3-1 Setting a Fault Action 3-4
Using the PowerFlex HIM 3-2 Resetting the Adapter 3-6
Setting the Node Address 3-3 Viewing the Adapter Configuration 3-7
Setting the I/O Configuration 3-3
Configuration Tools
Tool Refer To:
DriveExplorer Software (version 2.01
or higher)
DriveExplorer Getting Results Manual ,
Publication 9306-5.3, or the online help
DriveExecutive Software (version 1.01
or higher)
DriveExecutive Online Help
PowerFlex HIM page 3-2
20COMM-UM006A-EN-P.book Page 1 Friday, September 28, 2001 10:43 AM