User guide

Installing the Adapter 2-5
1. Remove power from the drive.
2. Use static control precautions.
3. Connect the Internal Interface cable to the DPI port on the drive and
then to the DPI connector on the adapter.
Figure 2.6 DPI Ports and Internal Interface Cables
Connecting the Adapter to the Drive
# Description # Description
➊
15.24 cm (6 in.) Internal Interface cable
➍
2.54 cm (1 in.) Internal Interface cable
➋
DPI Connector
➎
Retaining screws
➌
PROFIBUS Connector
PowerFlex 700 Drive
2 Frame & Larger
PowerFlex 700 Drive
0 - 1 Frame
PowerFlex 70 Drive
➋
➌
➍
➊
PROFIBUS Adapter
➎
20COMM-UM006A-EN-P.book Page 5 Friday, September 28, 2001 10:43 AM