User Manual

20-COMM-H RS-485 HVAC Adapter User Manual
Publication 20COMM-UM009D-EN-P
Index
A
adapter
applying power, 2-7
commissioning, 2-1
compatible products, 1-2
components, 1-1
configuration tools, 3-1
configuring I/O for, 3-5
connecting to a drive, 2-3
connecting to the network, 2-6
definition, G-1
features, 1-2
flash updating, 3-10
grounding, 2-5
installation, 2-1 to 2-8
mounting on the drive, 2-5
parameters, B-1 to B-4
resetting, 3-8
selecting operating mode, B-4
specifications, A-1
viewing its status, 3-9
applying power to the adapter, 2-7
attentions, 1-3
B
baud rate, see data rate
bit definitions of Logic Command/Status word for
PowerFlex 70/700/700H drives, C-1
PowerFlex 700S drives, C-3
bus off, G-1
C
cables
DPI Internal Interface, 2-3, 2-4
network, 2-6
Clear Counters parameter, B-4
Comm Flt Action parameter, B-3
commissioning the adapter, 2-1
communications module, see adapter
compatible products, 1-2
components of the adapter, 1-1
configuration tools, 3-1
connecting adapter to the
network, 2-6
connecting adapter to the drive, 2-3
connector on adapter, 1-1
ControlFLASH, G-1
controller, G-1
D
data rate
definition, G-1
setting, 3-3
data transfers
advanced (all protocols), 7-1 to 7-6
Metasys N2, 5-1 to 5-9
Modbus RTU, 4-1 to 4-13
Siemens Building Technologies P1 FLN, 6-1
to 6-10
Datalink Size parameter, B-2
Datalinks
definition, G-1
Metasys N2, 7-4
Modbus RTU, 7-3 to 7-4
Siemens Building Technologies P1 FLN, 7-5
to 7-6
using with all protocols, 7-1 to 7-6
diagnostic items, 8-4
dimensions, A-1
DPI
connector on adapter, 1-1
data rates, A-1
definition, G-1
Internal Interface cable, 2-3, 2-4
peripheral, G-2
products, 1-2, G-2
DPI Data Rate parameter, B-1
DPI I/O Act parameter, B-3
DPI I/O Cfg parameter, B-3
DPI Port parameter, B-1
DriveExecutive software
adapter configuration tool, 3-1
definition/web site, G-2
DriveExplorer software
adapter configuration tool, 3-1
definition/web site, G-2
free lite version, G-2
drives, see PowerFlex drives
DriveTools SP software, G-2
E
EEPROM, see Non-Volatile Storage (NVS)