Instruction Manual

Index-3
20-COMM-D DeviceNet Adapter User Manual
Publication 20COMM-UM002G-EN-P
H
heartbeat rate, G-4
HIM (Human Interface Module)
accessing parameters with, 3-2
definition, G-5
LCD model, 3-2
LED model, 3-2
hold last
configuring the adapter for, 3-11
definition, G-5
I
I/O
about, 5-1
configuring for
ControlLogix controller, 4-2
PLC-5 controller, 4-20
SLC 500 controller, 4-31
configuring the adapter for, 3-4
definition, G-5
understanding the I/O image, 5-2
using with
ControlLogix controller, 5-12
PLC-5 controller, 5-19
SLC 500 controller, 5-32
I/O Board option - in DPI External Comms Kit
configuring adapter to use optional I/O data,
8-3
understanding the I/O image, 8-2
using Datalink D to send I/O data, 8-2
viewing optional I/O diagnostic data, 8-4
Identity object, C-2
idle action, G-5
Idle Flt Action parameter, B-3
installation
applying power to the adapter, 2-8
commissioning the adapter, 2-10
connecting to the
drive, 2-4
network, 2-7
preparing for, 2-1
Internal Interface cables
connecting to the
adapter, 2-5
drive, 2-5
illustration, 2-5
L
LCD HIM, 3-2
LED HIM, 3-2
LEDs, see status indicators or name of indicator
Logic Command/Status
bit definitions for
PowerFlex 70/700/700H, and 700L (with
700 Control) drives, D-1
PowerFlex 700S (Phase II Control) and
700L (with 700S Control) drives, D-3
PowerFlex 750-Series drives, D-5
PowerFlex Digital DC drives, D-7
definition, G-5
in I/O image for
ControlLogix controller, 5-2
PLC-5 and SLC 500 controllers, 5-4
using, 5-6
M
MAC ID, see node address
manual
conventions, P-1
related documentation, P-2
website, P-2
Master-Slave hierarchy
communications, E-1
configuring adapter for, 3-5
definition, G-6
mechanical dimensions, A-1
messages, see explicit messaging or I/O
MOD status indicator
locating, 7-1
troubleshooting with, 7-2
mounting the adapter, 2-6
M-S Input parameter, B-4
M-S Input parameter configurations, 3-5, E-1
M-S Output parameter, B-5
M-S Output parameter configurations, 3-5, E-4
N
NET A status indicator
locating, 7-1
troubleshooting with, 7-3
NET B status indicator (not used), 7-1
network cable, 2-7