Owner manual

Rockwell Automation Publication 750COM-UM007A-EN-P - March 2013 41

Chapter

Configuring the Profinet Master

Profinet Masters are available from several manufacturers. This chapter provides

instructions on how to use the Profinet Master configuration tool to:

• Configure the Profinet Master

• Install the 20-750-PNET2P GSDML file

• Configure the 20-750-PNET2P option module as a PowerFlex 750

Profinet slave

Example Network

In this example, we will configure one PowerFlex 750-Series drive with a 20-750-

PNET2P option module, to be assigned as Station 1 on a Profinet network. This

configuration is used as an example system throughout the rest of this manual.

Most drives will have identical configurations apart from its IP address and

option module mapping. A drive is identified by the IP address on a Profinet

network. This chapter describes the steps to configure a simple network as shown

below.

Topic Page

Example Network 41

Configure the Profinet Controller 42

GSDML Installation 43

Slave Configuration 44

Profinet Master

Station 0

PowerFlex 750-Series Drive

Station 1