User Manual

56 Rockwell Automation Publication 750COM-UM008A-EN-P - July 2012
Chapter 4 Configuring the I/O
The Select Module dialog box appears.
4. Expand the Communications group to display all of the available
communication modules.
5. In the list, select the EtherNet/IP bridge used by your controller.
In this example, we use a 1756-EN2TR EtherNet/IP Bridge (Series A), so
the 1756-EN2TR/A option is selected.
6. Click OK.
7. In the Select Major Revision pop-up dialog box, select the major revision
of its firmware.
8. Click OK.
The bridge’s New Module dialog box appears.
9. Edit the following:
Box Setting
Name A name to identify the bridge.
Description Optional – description of the bridge.