User Manual

Rockwell Automation Publication 750COM-UM008A-EN-P - July 2012 37
Configuring the Option Module Chapter 3
Setting the Subnet Mask
1. Verif y that Device Parameter 05 - [Net Addr Sel] is set to “1”
(Parameters).
2. Set the value of Device Parameters 11 - [Subnet Cfg 1] through 14 -
[Subnet Cfg 4] to the desired value for the subnet mask.
3. Reset the option module; see Resetting the Option Module on page 49
.
Setting the Gateway Address
1. Verif y that Device Parameter 05 - [Net Addr Sel] is set to “1”
(Parameters).
2. Set the value of Device Parameters 15 - [Gateway Cfg 1] through 18 -
[Gateway Cfg 4] to the IP address of the gateway device.
3. Reset the option module; see Resetting the Option Module on page 49
.
Default = 0.0.0.0 255 . 255 . 255 . 255
[Subnet Cfg 1]
[Subnet Cfg 2]
[Subnet Cfg 3]
[Subnet Cfg 4]
Edit Subnet Cfg 1
0
0<<255
ESC

ENTER
Stopped
0.00 Hz
AUTO
F
Default = 0.0.0.0 255 . 255 . 255 . 255
[Gateway Cfg 1]
[Gateway Cfg 2]
[Gateway Cfg 3]
[Gateway Cfg 4]
Edit Gateway Cfg 1
0
0<<255
ESC

ENTER
Stopped
0.00 Hz
AUTO
F