Manual

Rockwell Automation Publication 750-UM003B-EN-P - July 2013 21
Installation and Wiring Chapter 2
Assemble the ATEX and 11-Series I/O Option Modules
After the S1 switches and safety enable jumper are set for your application, join
the ATEX option module with the 11-Series I/O option module.
1. Align the stand-off pins ➊ and the 20-pin connector ➋.
2. Pass the tips of the standoff pins through both boards so that the tip
completely expands.
IMPORTANT
Verify that the ATEX function switches are configured correctly for your
application before mounting on the 11-Series I/O option module. Once the
module is snapped into place, the switches are no longer accessible.