User Manual

3-2
Publication 198-UM001B-EN-P September 2001
To begin the configuration of DeviceNet, execute the RSNetworx software and complete the
following procedure.
1. From the 1HWZRUN menu, choose 2QOLQH. After “online” has been selected you will
see the following screen:
2. From the options shown on the above screen, choose the appropriate PC interface
and click OK. RSNetworx will tell the user to upload or download devices before
viewing configuration.
3. Select the OK button. RSNetworx will now browse the network and display all of the
nodes it has detected on the network.