User Manual

A-16 DeviceNet Information
Publication 198-UM001B-EN-P September 2001
Error Code
The following table describes the error codes.
Connection Object — Class ID (05hex)
Five instances of the Connection Object are supported. Instance 1 is the explicit message
connection. Instance 2 is the polled I/O connection. Instance 4 is the COS I/O connection.
Instances 5 and 6 are available for the UCMM. The following Instance 1 (explicit message
connection) attributes are supported. Refer to the DeviceNet Specification for more
information.
Table A.21 Error Code
Location No. — Bit I/O Module
76543210
00000000No Error
00000001Module Added
00000010Module Removed
00000011Module Different
00000100Invalid ID
00000101Invalid Module Configuration
00000110Too Many Modules
00000111CSum Error Count > 500
00001000Unused
00001001EEprom Failure
00001010Unable to Power Bus
00001011Sensoror Valve Voltage Error
00001100Overcurrent
00001101Short-Term Overtemp
00001110Long-Term Overtemp