User Manual

A-10 DeviceNet Information
Publication 198-UM001B-EN-P September 2001
Output Assembly Instance 100
This assembly reserves 4 bits (a nibble) for every output module on the system (except for the
two drive modules). This is the only output assembly available for the Series A
198-DN/DNG modules. The following table illustrates Instance 100.
Output Assembly Instance 102
This output assembly reserves a byte for every module available on the system, regardless of
type. The size of the assembly will determine the number of bytes. This is the default
assembly for the 198-DNG module if there are more than six modules.
Table A.13 Output Assembly Instance 100
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 198-IB2XOB1 198-IB2XOW1
— — Output 2 Output 1 — — Output 2 Output 1
1 198-IB2XOB2S 198-OW2-G4
— — Output 2 Output 1 — — Output 2 Output 1
2 — 198-IB2XOB2S
—————Output5Output4Output3
Table A.14 Output Assembly Instance 102
Slot Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
10———————Output1
21———————Output1
32————————
4 3 — — — — — — Output 2 Output 1
54————————
6 5 — Output 5 Output 4 Output 3 — — Output 2 Output 1