User Manual

5-40 Specifications
Publication 198-UM001B-EN-P September 2001
Table 5.Z Cat. No. 198-IA2XOW1 Specifications
Terminal Block (5.08 mm Pitch 4-Position)
Connection Capacity
Solid wire 0.13…1.5 mm
2
(24…16 AWG)
Flexible wires 0.13…2.5 mm
2
(24…14 AWG)
Flexible wires with ferrules 0.5…2.5 mm
2
(20…14 AWG)
Plastic collar 1.5 mm
2
(16 AWG)
Wire Type Use 75 C copper wire min.
Tightening Torque Spring clamp
Terminal Block (5.08 mm Pitch 2-Position)
Connection Capacity — Flexible wire 0.13…1.5 mm
2
(24…16 AWG)
Wire Type Use 75 C copper wire min.
Tightening Torque Insulation displacement
Electrical
Module Operating Voltage Range 11…25V DC
Module Voltage Rating 24V DC
Module Current Draw 35 mA @ 24V DC
Input Voltage Rating 120V AC
Input On-State Voltage Range 79…132V AC
Input On-State Current 11 mA @ 79V AC
16 mA @ 120V AC
Input Off-State Voltage Range <20V AC
Input Off-State Current <3.5 mA
Input Filter — Software Selectable
(with two I/O modules)
Off to On 1, 2, 4, 8, 16 ms
On to Off 1.3, 2, 4, 8, 16 ms
Input Compatibility IEC 1+
Output Voltage Rating 120V AC
Output Load Current 5 A per output
Switching Device Relay — B300, AC15, DC13
Module Isolation 132V AC working voltage
1500V AC for 1 s
Environmental
Ambient Temperature Operating –25…+60
°
C (–4…+140
°
F)
Storage –40…+85
°
C (–40…+185
°
F)
Relative Humidity 0…95% non-condensing
Shock Operating 30 g peak acceleration
Non-Operating 50 g peak acceleration
Operating Vibration 10 g @ 58…2000 Hz
0.060 in. peak-to-peak displacement 2…57 Hz
Per IEC 68-2-6
Approvals
Agency Certification
(when product is marked)
cUL
UL Listed
CE marked for all applicable directives