Owner manual

41053-268-01

DIR 41053-268 (Version 03)

Printed in U.S.A.

WARNING

To prevent electrical shock, disconnect from power source before installing or servicing.

Overload Relay Replacement

Disassembly

(Cat 193-NREC1ZZ; -NREC3ZZ; -NREC5ZZ)

Remove voltage module

plug for 193-NREC5ZZ

Accessory 193-EIMD Shown

PAGE 1
Overload Relay Replacement (Cat 193-NREC1ZZ; -NREC3ZZ; -NREC5ZZ) To prevent electrical shock, disconnect from power source before installing or servicing. WARNING Disassembly 1 4 3 2 1 x2 3 2 1 2 x8 x7 5 3 4 Accessory 193-EIMD Shown 41053-268-01 DIR 41053-268 (Version 03) Printed in U.S.A.
PAGE 2
3 WARNING Label or identify phase wires before cutting.
PAGE 3
Reassembly 6 Be sure to run Phase 1, 2 and 3 through Phase 1, 2 and 3 of overload, respectively. WARNING Ø1 Ø2 Ø3 7 Do not cross or mix-up phase wires while reconnecting. WARNING T20 15 lb-in x2 1 20 lb-in x2 3 For 193-EC5_F only (Not required for 193-EC5_G or 193-EC5_H) 8 2 Check for wire secureness after crimping. WARNING 2 x3 1 .
PAGE 4
9 5 lb-in x8 5 lb-in x7 4 3 Install voltage module plug for 193-NREC5ZZ 4 2 1 Accessory 193-EIMD Shown 10 Click 11 1 5 lb-in 2 41053-268-01 DIR 41053-268 (Version 03) Printed in U.S.A.