User Manual

Publication 193-UM010A-EN-P – January 2008
3-12 PROFIBUS Configuration
PROFIBUS Setup Group
Trip Log 2 Index No. 32
This parameter records the trip previous to Trip Log 1. Access Rule Read
Size 2 bytes
Group Trip History
Units —
Min. Value See Trip Status table
Max. Value See Trip Status table
Default Value None
Trip Log 3 Index No. 33
This parameter records the trip previous to Trip Log 2. Access Rule Read
Size 2 bytes
Group Trip History
Units —
Min. Value See Trip Status table
Max. Value See Trip Status table
Default Value None
Trip Log 4 Index No. 34
This parameter records the trip previous to Trip Log 3. Access Rule Read
Size 2 bytes
Group Trip History
Units —
Min. Value See Trip Status table
Max. Value See Trip Status table
Default Value None
SSA Node Address Index No. 35
This parameter holds the latest node address sent by the Set
Slave Address telegram. This is the node address the slave
will start up with after the next power-cycle.
NOTE: This parameter is added to provide a way to change
the node address in the case that the master does not
support the SSA service.
Normally this parameter does not need to be used.
Access Rule Read/Write
Size 1 byte
Group PROFIBUS Setup
Units —
Min. Value 0
Max. Value 126
Default Value 126