Owner manual

Publication 193-UM006A-EN-P – October 2005
B-10 DeviceNet Information
Discrete Input Point Object — CLASS CODE 0x0008
The following class attributes are supported for the Discrete Input Point
Object:
Two instances of the Discrete Input Point Object are supported as follows:
The following common services are implemented for the Discrete Input Point
Object:
Discrete Output Point Object — CLASS CODE 0x0009
The following class attributes are supported for the Discrete Output point
Object:
Table B.23 Discrete Input Point Object Class Attributes
Attribute ID Access Rule Name Data Type Value
1 Get Revision UINT 2
2 Get Max Instance UINT 2
Table B.24 Discrete Input Point Object Instances
Attribute ID Access Rule Name Data Type Value
3 Get Value BOOL 0=OFF
1=ON
Table B.25 Discrete Input Object Common Services
Service
Code
Implemented for:
Service Name
Class Instance
0x0E Yes Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single
Table B.26 Discrete Output Point Object Class Attributes
Attribute ID Access Rule Name Data Type Value
1 Get Revision UINT 1
2 Get Max Instance UINT 1