Owner manual

Publication 193-UM006A-EN-P – October 2005
B-4 DeviceNet Information
The following services are implemented for the DeviceNet Object:
Assembly Object — CLASS CODE 0x0004
The following class attributes are supported for the Assembly Object:
Output Assemblies
The following output assembly instances are implemented:
Table B.8 DeviceNet Object Common Services
Service
Code
Implemented for:
Service Name
Class Instance
0x0E Yes Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single
0x4B No Yes Allocate_Master/Slave_Connection_Set
0x4C No Yes Release_Master/Slave_Conncetion _Set
Table B.9 Assembly Object Class Attributes
Attribute ID Access Rule Name Data Type Value
2 Get Max Instance UINT TBD
Table B.10 Instance 2 — Basic Overload Output Assembly from ODVA Profile
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0Trip Reset
Table B.11 Instance 101 — Similar to Basic Contactor Output Assembly in ODVA
Contactor Profile
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Output A
Table B.12 Instance 103 — Similar to Basic Motor Starter Output Assembly in
ODVA Starter Profile
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Trip Reset Output A