Owner manual

Publication 193-UM006A-EN-P – October 2005
3-4 DeviceNet Node Commissioning
8. Next to the selected Polled check box, do the following:
• Type 6 in Input Size.
• Type 1 in Output Size.
9. Select Next. RSNetWorx uploads the EDS file from the E1 Plus
DeviceNet Module.
10. To display the icon options for the node, select Next.
11. Select the E1 Plus Overload Relay icon by highlighting it and clicking
Change Icon.
12. After selecting the desired icon, select OK.
13. Select Next.
14. When prompted to register this device, select Next.
15. Select Finish. After a short time, RSNetWorx updates the online screen
by replacing “Unrecognized Device” with the name and icon given by
the EDS file that you have just registered.
Using the Node Commissioning Tool of RSNetWorx for DeviceNet
1. From the To ols menu at the top of the screen, select Node
Commissioning.
2. Select Browse.
Figure 3.4 Node Commissioning Device Solution Window