User Manual

98 Rockwell Automation Publication 193-UM002I-EN-P - December 2011
Chapter 4 DeviceNet™ Node Commissioning
7. OPTIONAL STEP: Type a value in the Catalog and File Description Text
fields., then select Next.
8. On the Input/Output Screen in the EDS Wizard, select the Polled
checkbox, then enter a value of 8 for Input and 1 for output as shown
below.
9. Select Next. The RSNetWorx will upload the EDS file from the E3
Overload Relay.
10. Select Next to display the icon options for the node.
11. Select the E3 Overload Relay icon, then click Change Icon.
12. Select OK after selecting the desired icon.
13. Select Next.
14. Select Next when prompted to register this device.
15. Select Finish.