User Manual

254 Rockwell Automation Publication 193-UM002I-EN-P - December 2011
Appendix B DeviceNet™ Information
➊ 50…100% for devices with FRN 1.003 and earlier.
➋ FRN 2.000 and later.
➌ FRN 1.003 and earlier.
➍ FRN 3.001 and later.
The following common services are implemented for the Overload Object:
DPI Fault Object - CLASS
CODE 0x0097
This object provides access to fault information within the device. The following
class attributes will be supported:
Five instances of the DPI Fault Object will be supported.
195➋
229➌
Get
L3 Current Times
10
UINT
This attribute exists
only for current ranges
that report 2 decimal
place resolution
Current
Range
Dependent
196➋
230➌
Get
Avg Current Div
10
UINT
This attribute exists
only for current ranges
that report 0 decimal
place resolution
Current
Range
Dependent
197➋
231➌
Get L1 Current Div 10 UINT
This attribute exists
only for current ranges
that report 0 decimal
place resolution
Current
Range
Dependent
198➋
232➌
Get L2 Current Div 10 UINT
This attribute exists
only for current ranges
that report 0 decimal
place resolution
Current
Range
Dependent
199➋
233➌
Get L3 Current Div 10 UINT
This attribute exists
only for current ranges
that report 0 decimal
place resolution
Current
Range
Dependent
Table 121 - Overload Object Common Services
Service
Code
Implemented for: Service
Name
Class Instance
0x0E Yes Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single
Table 120 - Overload Object Instance Attributes
Attribute
ID
Access
Rule
Name Data
Type
Value Default
Table 122 - Fault Object Instance Attributes
Attribute ID Access
Rule
Name Data Type Value
1GetClass RevisionUINT1
2GetNumber of InstancesUINT5
3Get/SetFault Cmd WriteUSINT
0=NOP; 1=Clear Fault;
2=Clear Flt Queue
4GetFault Instance ReadUINT
The instance of the Fault
Queue Entry containing
information about the Fault
that tripped the Device
6Get
Number of Recorded
Faults
UINT
The number of Faults
recorded in the Fault Queue