User Manual

Rockwell Automation Publication 193-UM002I-EN-P - December 2011 143
Monitoring Parameters Chapter 6
TRIP LOG 2
This parameter records the trip previous to
Trip Log 1.
Parameter Number 18
Access Rule Get
Data Type WORD
Object Mapping 0x29-1-118
Group Monitor
Units —
Minimum Value See Trip Status table
Maximum Value See Trip Status table
Default Value None
TRIP LOG 3
This parameter records the trip previous to
Trip Log 2.
Parameter Number 19
Access Rule Get
Data Type WORD
Object Mapping 0x29-1-119
Group Monitor
Units —
Minimum Value See Trip Status table
Maximum Value See Trip Status table
Default Value None
TRIP LOG 4
This parameter records the trip previous to
Trip Log 3.
Parameter Number 20
Access Rule Get
Data Type WORD
Object Mapping 0x29-1-120
Group Monitor
Units —
Minimum Value See Trip Status table
Maximum Value See Trip Status table
Default Value None
DEVICE STATUS
This parameter provides status
information of the E3 Overload Relay as
outlined in the table below.
1 = On or Present
0 = Off or Not Present
Parameter Number 21
Access Rule Get
Data Type WORD
Object Mapping 0x29-1-121
Group Monitor
Units —
Minimum Value —
Maximum Value —
Default Value None
Bit Function:
1514131211109876543210
XTrip
XWarning
XOutput A
XOutput B (E3 Plus)
XInput #1
XInput #2
XInput #3 (E3 Plus)
XInput #4 (E3 Plus)
X Motor Current
X Ground Fault Current (E3
Plus)