Quick Start Manual

74 Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Chapter 4 Logic Configuration
Import the Preconfigured Logix Designer Project
Follow these steps to open the preconfigured RSLogix 5000 or Studio 5000 Logix Designer project. This
procedure is written for the Logix Designer application, but RSLogix 5000 software is similar.
1. From the Start menu, launch the Studio 5000 Logix Designer application.
The Studio 5000 dialog box opens.
2. Under the Create menu, click From Import.
3. Navigate to the Logic directory within the DMAT project.
If the Drives and Motion Accelerator Toolkit was installed in the default directory you will find the XML
file in: C:\Documents and Settings\My Documents\DMAT\ProjectName\MachineName.