Quick Start Manual

68 Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Chapter 3 System Layout and Wiring
5. Edit your Enclosure Layout Drawing.
a. Open the enclosure layout drawing for your application.
For the Widg-O-matic machine application example, the 140_SM_Enclosure_Layout.dwg file is opened.
Small Enclosure Layout Drawing
b. Inspect the drawing for operator equipment required for your system.
c. Open the associated enclosure footprint drawings that were added to your project drawings from the
toolkit library.
For the Widg-O-matic machine application example, the 600_PanelView_Plus_Footprints.dwg file is
opened.