Quick Start Manual

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 67
System Layout and Wiring Chapter 3
4. Inspect control section for required control components and proper footprints.
a. Open the panel layout drawing for your application.
Small Panel Layout Drawing (control)
b. Inspect controller for required processor, I/O chassis, and I/O and communication modules, and add
footprints from the standard library as required.
c. Add any other required control components for your system.
DIRTY
D6
CLEAN
C2
LIM Module
AC Line Filter
CLEAN wireway for noise sensitive device
circuits.
DIRTY wireway for noise generating
device circuits.
Controller and I/O
Section