Quick Start Manual

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 61

System Layout and Wiring Chapter 3

Edit System Communication Drawings

1. Open the communication drawing for your application.

For the Widg-O-matic machine application example, the 060_120_Ethernet_Communication.dwg file is

opened.

2. Delete network devices not used in the project.

For the Widg-O-matic machine application example, one of the Kinetix 300 drives and associated cable is

deleted.

Ethernet Communication

Select and

delete

this drive

and cable.