Quick Start Manual

38 Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Chapter 2 Bill of Materials Completion
Follow These Steps
Complete these steps to complete the commissioning process for your drives and motion application.
Import the Initial Project BOM File
Follow these steps to import the initial project BOM file.
1. Open ProposalWorks software, navigate to File Menu>Utilities, and select Import.
If you chose to assemble the initial BOM file using ProposalWorks software, open the ProposalWorks
(.prp) file you created in Appendix E and skip to step 2.
page 38
Import the Initial
Project BOM File
Edit Your Project BOM File
page 40
Start