Quick Start Manual

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 341
Controller, Network, and Device Configuration Without the DMAT Wizard Appendix G
4. Select the Device Module program file that fits your initial PowerFlex standard drive within your machine
based on the PowerFlex Drives Logic Modules table.
PowerFlex Drives Logic Modules
For the Widg-O-matic application example, PF753_Drive_Module.L5X program file was selected for the
only PowerFlex drive in the machine.
Device Module Program File Supported Devices
PF4xx_Drive_Module.L5X PowerFlex 4-class standard drives (for example, PF40P_Drive_Module.L5X supports PowerFlex 40P Drives).
PF7xxx_Drive_Module.L5X PowerFlex 7-class standard drives (for example, PF70EC_Drive_Module.L5X supports PowerFlex 70EC Drives).
PF70EC_Drive_Module_Energy.L5X PowerFlex 70EC drives with additional logic to support an energy data tab on the HMI faceplate.
PF700S_2P_Drive_Module_Energy.L5X PowerFlex 700S_2P drives with additional logic to support an energy data tab on the HMI faceplate.
PF700VC_Drive_Module_Energy.L5X PowerFlex 700VC drives with additional logic to support an energy data tab on the HMI faceplate.
PF753_Drive_Module.L5X PowerFlex 753 standard drives
PF753_Drive_Module_Energy.L5X PowerFlex 753 standard drives with additional logic to support an energy data tab on the HMI faceplate.
PF755_Drive_Module.L5X PowerFlex 755 drive configured as a standard drive.
PF755_Drive_Module_Energy.L5X PowerFlex 755 standard drives with additional logic to support an energy data tab on the HMI faceplate.
PF525_Drive_Module.L5X PowerFlex 525 EENET drive.