Quick Start Manual

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 253
Create and Add BOM Device Modules Without the DMAT Wizard Appendix E
d. Select the PVP 6 in Module-L.prp or PVP 10 in Module-L.prp file based on the relative size of your
PanelView Plus required for your application.
For the Widg-O-matic machine application example, the PVP 10 in Module-L.prp file is selected for
support of a PanelView Plus 1000 terminal in the system.
e. Click Open.
The Import Completion Confirmation dialog box opens.
f. Click OK.
The selected PanelView Plus hardware
is added to the end of the initial BOM
file.
5. Import the Ethernet communication
BOM file.
a. Click File and choose Utilities>Import.
The Import Equipment List from File dialog box opens.