Quick Start Manual

180 Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Chapter 7 System Application Guide
Jog Status/Control Buttons
Jog Speed, Move Distance, and Speed Controls
Jog Spd, Move Dist, and Move Spd are both indicators and keypad input buttons. For example, the Jog Spd
indicator displays the actual speed feedback of the drive, not the desired jog speed. However, by clicking the
indicator you launch the keypad input object where you can enter the desired jog speed.
Dual Purpose Controls
Button/Indicator Description
Conditions Required for
Each Manual Control Button
CIP Motion/
Sercos Drives
Kinetix 300 Drives
(1)
(1) For the Kinetix 300 drive in Jog control mode, Drive Enable is not applicable.
Position Displays the actual position of the drive.
• Operator Mode
• Drive Enabled
• Jog Selected
• Operator Mode
• Jog Selected
Jog Spd
Dual purpose control. Displays the actual speed feedback of the drive. Also launches the
numeric keypad to enter the desired Jog Speed.
• Operator Mode
• Drive Enabled
• Jog Selected
• Operator Mode
• Jog Selected
Jog Fwd
Jogs the drive in the forward direction while the button is held. The drive stops immediately
once the button is released.
• Operator Mode
• Drive Enabled
• Jog Selected
• Operator Mode
• Jog Selected
Jog Rev
Jogs the drive in the reverse direction while the button is held. The drive stops immediately
once the button is released.
• Operator Mode
• Drive Enabled
• Jog Selected
• Operator Mode
• Jog Selected
Actual speed feedback from drive.
Enter desired jog speed.