Quick Start Manual

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 171
Chapter 7
System Application Guide
This chapter guides you through the pre-configured FactoryTalk View Machine Edition application faceplates
providing you with an understanding of the status, control, and diagnostic operation of the faceplate displays.
Before You Begin
• Complete your logic configuration (refer to Chapter 4).
• Complete your FactoryTalk View Machine Edition configuration (refer to Chapter 5).
• Complete your Logix5000 and PanelView Plus application downloads (refer to Chapter 6).
What You Need
• The Drives and Motion Accelerator Toolkit DVD, publication IASIMP-SP017. For a copy of the DVD,
contact your local Rockwell Automation distributor or sales representative.
• Hardware installation and wiring complete with power applied.
• Logix Designer project file downloaded to the Logix5000 controller and controller set to run.
• FactoryTalk View ME runtime application file downloaded to the PanelView Plus terminal. Run
Application activated on terminal.