Quick Start Manual

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 147
Chapter 6
System Commissioning
In this chapter you download your Logix5000 and PanelView Plus applications, prepare and tune your drive
hardware, verify network communications, and verify general operator/program control.
Before You Begin
• Complete your logic configuration (refer to Chapter 4) or complete Appendix G
• Complete your FactoryTalk View Machine Edition configuration (refer to Chapter 5)
What You Need
• The Drives and Motion Accelerator Toolkit DVD, publication IASIMP-SP017. For a copy of the DVD,
contact your local Rockwell Automation distributor or sales representative
• RSLogix 5000 software, version 19.0 or later, or the Logix Designer application, version 21.0 or later.
• RSLogix 5000 software, version 20.0 or later or the Logix Designer application, version 21.0 or later, to
configure Kinetix 350 servo drives, and when using ControlLogix 1756-L7xS controllers.
• FactoryTalk View Studio software, version 5.10 or later
• The user manual for your Drives and Motion hardware. Refer to Additional Resources on page 15 for
publication numbers.