Quick Start Manual

142 Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013

Chapter 5 FactoryTalk View ME Configuration

4. Click to browse the display faceplates.

The Component Browser opens.

5. Select the faceplate display to launch from the first

row Goto display button.

For the Widg-O-matic application example, the

CIPMotion_Faceplate is selected.

6. Click OK to close the Component Browser dialog

box.

7. Click to browse the parameter

files.

The Component Browser opens.

8. Select the parameter associated with

the display to be launched from the

first row Goto display button.

For the Widg-O-matic application

example, the Gantry_X_Axis

parameter is selected.

9. Click OK to close the Component

Browser dialog box.

10. Click OK to save your edits to the

Goto Display Button Properties

dialog box.

11. Repeat steps step 3…step 10 for each Goto Display Button used in the Equipment Status faceplate.

Unused buttons can remain on the display, but won’t be visible based on the Inp_NumRowsVis tag value

set in Chapter