Quick Start Manual

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 139
FactoryTalk View ME Configuration Chapter 5
Add the ME_Equipment_Parameter File
1. Right-click Parameters within the Graphics
folder and select Add Component Into
Application.
2. Navigate to the 04_Equipment_Status
folder within the toolkit’s files folder.
Your personal computer’s harddrive path is
C:\Program Files\RA_Simplification\
DMAT\B-Files\5-HMI\ME\HMI
Modules\04_Equipment_Status.
3. Select the EquipmentStatus_Parameter.par
file.
4. Click Open.
5. Verify the ME_Equipment_Parameter file
appears under Parameters.
6. Double-click ME_Equipment_Parameter to
open the parameter editor.
The EquipmentStatus_Parameter dialog box opens.