Quick Start Manual

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 119
FactoryTalk View ME Configuration Chapter 5
6. Select the faceplate display file you desire to add.
For this example, the PVP1000_Startup_Faceplate.gfx was selected
7. Click Open.
The selected display is added to the Displays folder.
8. Repeat step 3…step 7 for each faceplate required for your application.
TIP
Only one faceplate is required for multiple device/modules of the same type. For example, if your application has two
Kinetix 6500 drives requiring a faceplate, only one CIPMotion_Faceplate.gfx display is required.