User Manual Instruction Manual

98 Rockwell Automation Publication 193-UM014B-EN-P December 2011
Appendix B
QoS Object — CLASS CODE 0x48
The following class attributes will be supported for the QoS object.
Table 49 - QoS Object Class Attributes
A single instance (Instance 1) will be supported.
Table 50 - QoS Object Instance
The following common services will be implemented for the QoS object.
Table 51 - QoS Object Common Services
Non-Volatile Storage Object — CLASS CODE 0xA1
The following instances of the Non-Volatile Storage object will be supported.
Table 52 - Non-Volatile Storage Object Instances
Attribute ID Access Rule Name Data Type Value
1 Get Revision UINT 1
Attribute ID Access Rule Name Data Type Value
1 Set 802: 1Q Tag Enable USINT 0=Disable (default)
1=Enable
4 Set DSCP Urgent USINT Default=55
5 Set DSCP Schedule USINT Default=47
6 Set DSCP High USINT Default=43
7 Set DSCP Low USINT Default=31
8 Set DSCP Explicit USINT Default=27
Service Code
Implemented for:
Service NameClass Instance
0x0E Yes Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single
NVS Object Instance Entity to be Updated
1 EtherNet/IP Module Application Code
2 EtherNet/IP Module Boot Code
3 EtherNet/IP Module FPGA Image