User Manual Instruction Manual

Rockwell Automation Publication 193-UM014B-EN-P December 2011 47
Chapter 6
Automatic Device Recovery or Replace
Introduction
In this chapter, using the Automatic Device Recovery or Replace (ADR) will be
explained. The use of this feature reduces downtime if a device needs to be
replaced.
With ADR, there is no need for software tools to get a replacement device
configured and online. The EtherNet/IP Communications Auxiliary
automatically configures the replacement device if the device was listed in the
scan list and the appropriate electronic keying was selected.
Setting ADR
1. Navigate to Scan List>Configuration>Advanced.
2. Select the appropriate electronic keying for your DeviceNet network
application.
IMPORTANT
Not all DeviceNet devices support ADR.