User Manual Instruction Manual

46 Rockwell Automation Publication 193-UM014B-EN-P December 2011
Chapter 5
6. Click the down arrow on the pull-down boxes to adjust fixed values and/or
enter numerical values in the fields without an arrow to adjust the values.
7. Click Apply once all parameter edits have been completed. The EtherNet/
IP Communications Auxiliary will download the new parameter values to
the device. A confirmation window will appear.
8. Click OK.
9. Continue editing the remaining parameters, if desired.
NOTE:
If a DeviceNet module does not support the parameter object, the following
window will appear: