User Manual Instruction Manual

18 Rockwell Automation Publication 193-UM014B-EN-P December 2011
Chapter 2
3. If appropriate for the network, type the subnet mask, gateway address,
primary/secondary server addresses, and domain name in their respective
fields.
4. Click OK.
The Request History panel displays the hardware addresses of modules
issuing BOOTP or DHCP requests.
5. Double-click the MAC address of the module to be configured.
NOTE: The MAC address is printed on the front of the EtherNet/IP Communications
Auxiliary. The format of the hardware address resembles:
00-0b-db-14-55-35