Instruction Manual
Table Of Contents
- FlexArmor 24V dc Sinking Input Modules Installation Instructions
- Package Contents
- European Union Directive Compliance
- Related Publications
- Install Your FlexArmor I/O Module
- Install the Modules into the Baseplate
- Connect the Cordset to the FlexArmor Module
- Communicate with Your FlexArmor System
- Troubleshooting with the Indicators
- Specifications
- Hazardous Location Approval
- Back Cover
FlexArmor 24V dc Sinking Input Modules 3
Publication 1798-IN001A-EN-P - January 2001
For specific information required by EN 61131-2, see the appropriate
sections in this publication, as well as the following Allen-Bradley
publications:
• Industrial Automation Wiring and Grounding Guidelines For
Noise Immunity, publication 1770-4.1
• Automation Systems Catalog, publication B113
Related Publications
For software configuration information, refer to the 1798-ADN User
Manual, publication 1798-UM001A-US-P and the 1798-APB User
Manual, publication 1798-UM002A-EN-P.
Install Your FlexArmor I/O Module
To install the module:
• Install the modules into the Baseplate
• Connect the cordsets
• Communicate with the module
These steps are explained in more detail in the following
procedures.
For instructions on how to mount the FlexArmor Baseplate,
refer to publication no. 1798-IN003A-EN-P.