Manual
IndexI–2
Publication
1794-6.5.7
K
keyswitch
positions, 2–4
M
manual calibration, 6–4
mapping, 1794-IT8, 4–4, 5–3
module, shipping state, 6–1
module fault, 5–2
module features, 1–3
module installation, 2–4
O
of
fset calibration, 6–7
using DeviceNetManager
, 6–9
open circuit error
, A–8
optimal defaults, 5–7
P
PLC–2 programming, 3–4
polled I/O, structure, 5–1
power defaults, 5–7
preparing for calibration, 6–4
programming example
PLC–3, 3–2
PLC–5, 3–3
R
range, selecting, 4–2
read/write words, for calibration, 6–7
removing and replacing, under power
(RIUP), 2–4
repeatability
, worst case, A–8
resolution curves, A–3
type B thermocouple, A–3
type C thermocouple, A–4
type E thermocouple, A–3
type J thermocouple, A–4
type K thermocouple, A–5
type N thermocouple, A–7
type R thermocouple, A–5
type S thermocouple, A–6
type T thermocouple, A–6
S
sample program, 3–4
scaling, 4–2
software, DeviceNetManager
, 5–1
specifications, thermocouple, A–1
status indicators, 2–8
system throughput, 5–3
T
terminal bases, compatible, 2–5
thermocouple input mapping, 1794-IT8,
4–4, 5–3
thermocouple/1794-TB3T example, 2–7
throughput, normal mode, 4–3
W
wiring
connections, 6–6
methods of, 2–3
to terminal bases, 2–1
wiring connections, 2–5
1794-IT8, 2–6, 6–6