Owner manual
Table Of Contents
- 1794-UM066A-EN-P FLEX I/O Dual Port EtherNet/IP Adapter Modules User Manual
- Important User Information
- Preface
- Table of Contents
- 1 - Overview of FLEX I/O and Your Redundant EtherNet/IP Adapter Module
- Overview
- The FLEX I/O System
- Adapter Features
- Types of Adapters
- Hardware and Software Compatibility
- What the Adapter Does
- Use of the Control and Information Protocol (CIP)
- Understanding the Producer/Consumer Model
- Specifying the Requested Packet Interval (RPI)
- Support of Rack Optimized and Direct Connections
- Chapter Summary
- 2 - Install Your FLEX I/O Adapter
- 3 - Configure the Adapter for Your EtherNet/IP Network
- 4 - Rack Optimized Discrete I/O
- 5 - Analog I/O with Direct Connection
- A - Interpret Status Indicators
- B - Specifications
- C - Configure the RSLinx Ethernet Communication Driver
- D - Adapter Web Dialogs
- Index
- Back Cover
Publication 1794-UM066A-EN-P - February 2012
Index 77
status indicators 7, 51
subnet mask
configure 15
switches
IP address 7
thumbwheel 12
T
TCP/IP
network 21
protocol iii
terminal base 1, 2, 9
adjacent 9, 10
unit 9
thumbwheel
settings 12
switches 12
thumbwheel switches
invalid number 12
read 12
transfer data 4
U
unique
48-bit hardware address 15
combination of bits 18
IP address 15, 52
unique IP address 15
W
web dialogs
CIP connection statistics 64
configuration 68
diagnostic overview 63, 64
ethernet statistics 63, 66
home page 61
I/O connections 63, 67
module settings 64
network settings 63, 65
password 69
ring status 64
system resource utilization 64
user name 69
web server 61