Owner manual
Table Of Contents
- 1794-UM066A-EN-P FLEX I/O Dual Port EtherNet/IP Adapter Modules User Manual
- Important User Information
- Preface
- Table of Contents
- 1 - Overview of FLEX I/O and Your Redundant EtherNet/IP Adapter Module
- Overview
- The FLEX I/O System
- Adapter Features
- Types of Adapters
- Hardware and Software Compatibility
- What the Adapter Does
- Use of the Control and Information Protocol (CIP)
- Understanding the Producer/Consumer Model
- Specifying the Requested Packet Interval (RPI)
- Support of Rack Optimized and Direct Connections
- Chapter Summary
- 2 - Install Your FLEX I/O Adapter
- 3 - Configure the Adapter for Your EtherNet/IP Network
- 4 - Rack Optimized Discrete I/O
- 5 - Analog I/O with Direct Connection
- A - Interpret Status Indicators
- B - Specifications
- C - Configure the RSLinx Ethernet Communication Driver
- D - Adapter Web Dialogs
- Index
- Back Cover
Publication 1794-UM066A-EN-P - February 2012
64 Adapter Web Dialogs
Use the Diagnostic Overview Page
To use the Diagnostic Overview page for general diagnostics information, click
Diagnostic Overview from the tab at the top of the page or panel on the left.
From the Diagnostic Overview page, you can view the following:
•Ring Status
–Network Topology
–Network Status
–Ring Supervisor
• System Resource Utilitization
– CPU Utilization
–Module Uptime
• CIP Connection Statistics
–Current CIP MSG Connections
–CIP MSG Connection Limit
– Max Msg Connections Observed
–Current CIP I/O Connections
–CIP I/O Connection Limit
– Max I/O Connections Observed
–Conn Opens
–Open Errors
– Conn Closes
– Close Errors
– Conn Timeout
•Module Settings
–Switches