Instruction Manual

ArmorBlock 4 Input Module32
Publication 1792-5.1 – October 1996
”Input 4 Value”, $ Parameter Name
””, $ Units String
$$$$$$$$$$ Help string $$$$$$$$$$$
”This parameter is the current value of Input 4.”,
0,1,0, $ Min, Max, and Default values
1,1,1,0,0,0,0,0,0; $ Not Used
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$$$$$$$$$$
Param9 = $ Input status
0, $ reserved
6, $ Link Path Size
”20 1D 24 01 30 05”, $ Link Path to Dicrete Input Group status attribute.
0x0032, $ No support for settable path, scaling, or scaling
$ links.
$ Value is gettable only. Enumerated strings are
$supported.
8, $ Data Type – unsigned short int
1, $ Data Size – (in bytes)
”Input Status”, $ Parameter Name
””, $ Units String
$$$$$$$$$$ Help string $$$$$$$$$$$
”This parameter is the current status of the sensor source voltage.”,
0,1,0, $ Min, Max, and Default values
1,1,1,0,0,0,0,0,0; $ Not Used
[Groups]
Group1=”Configuration”,3,1,2,3;
Group2=”I/O”,6,4,5,6,7,8,9;
[EnumPar]
Param1=”Enable”,”Disable”;
Param2=”0 ms”,”2 ms”,”4 ms”,”8 ms”,”16 ms”;
Param3=”0 ms”,”2 ms”,”4 ms”,”8 ms”,”16 ms”;
Param4=”Nothing Selected”,”Reset Sensor Source Voltage”;
Param9=”Healthy”,”Faulted”;