Manual
Table Of Contents
- 1792-5.3, ArmorBlock 16 Input Module, Installation Instructions
- European Union Directive Compliance
- Install Your ArmorBlock Module
- Connect the Wiring to the ArmorBlock Module
- Communicate with Your ArmorBlock Module
- Configure Your ArmorBlock Module Offline Using the DeviceNet Manager Configuration Tool
- Configure Your ArmorBlock Module Online Using the DeviceNet Manager Configuration Tool
- Monitoring Parameters Online
- Reset Faults
- Configure Your ArmorBlock Module Using EDS Files
- Specifications
- Back Cover

ArmorBlock 16 Input Module36
Publication 1792-5.3 – October 1996
$ Value is gettable only. Enumerated strings are not
$ supported.
8, $ Data Type – unsigned short int
1, $ Data Size – (in bytes)
”Input 15 Value”, $ Parameter Name
””, $ Units String
$$$$$$$$$$ Help string $$$$$$$$$$$
”This parameter is the current value of Input 15.”,
0,1,0, $ Min, Max, and Default values
1,1,1,0,0,0,0,0,0; $ Not Used
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$$$$$$$$$$
Param20 = $ Input 16 value
0, $ reserved
6, $ Link Path Size
”20 08 24 10 30 03”, $ Link Path to Input 16 value attribute.
0x0030, $ No support for settable path, scaling, or scaling
$ links.
$ Value is gettable only. Enumerated strings are not
$ supported.
8, $ Data Type – unsigned short int
1, $ Data Size – (in bytes)
”Input 16 Value”, $ Parameter Name
””, $ Units String
$$$$$$$$$$ Help string $$$$$$$$$$$
”This parameter is the current value of Input 16.”,
0,1,0, $ Min, Max, and Default values
1,1,1,0,0,0,0,0,0; $ Not Used
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$$$$$$$$$$
Param21 = $ Input status
0, $ reserved
6, $ Link Path Size
”20 1D 24 01 30 05”, $ Link Path to Dicrete Input Group status attribute.
0x0032, $ No support for settable path, scaling, or scaling
$ links.
$ Value is gettable only.
$ Enumerated strings are supported.
8, $ Data Type – unsigned short int
1, $ Data Size – (in bytes)
”Input Status”, $ Parameter Name
””, $ Units String
$$$$$$$$$$ Help string $$$$$$$$$$$
”This parameter is the current status of the sensor source voltage.”,
0,1,0, $ Min, Max, and Default values
1,1,1,0,0,0,0,0,0; $ Not Used
[Groups]
Group1=”Configuration”,3,1,2,3;
Group2=”I/O”,18,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21;