Instruction Manual

10 CompactBlock Distributed I/O on Remote I/O
Publication 1791R-IN001A-EN-P - February 2002
3. Place screws through each of the 2 mounting holes and
tighten until the module is firmly in place.
DIN Rail Mounting
1. Hook top of slot over the DIN Rail.
2. Pull down on the locking lever while pressing the block
against the rail.
3. Push up on the locking lever to secure the block to the rail
when block is flush against the rail.
Status
Comm
01
2
34
5
67
01
2
34
5
67
CompactBlock I/O
1791R-8V8P
8 INPUTS / 8 OUTPUTS - DC POWER
Allen-Bradley
Remote I/O
Base Module
141 mm
5.55 in
41 mm
1.6 in
41673
90358
Locking Lever