Instruction Manual

6 CompactBlock Distributed I/O on PROFIBUS DP Series D
Publication
1791P-IN002B-EN-P - October 2003
The switches are read at module power up only.
Mount the Block(s)
The base and expansion modules mount to a panel or DIN rail, which must
be grounded before installing the module(s).
Base Module Mounting
You can install the CompactBlock base module on a panel or DIN rail.
Address
DIP Switches
100’s
Rotary Switches
Position 1 Position 2 10’s 1’s
0-99 0 0 0-9 0-9
100-125 1 0 0-2 0-5
WARNING
When used in a Class I, Division 2, hazardous
location, this equipment must be mounted in a suitable
enclosure with proper wiring method that complies
with the governing electrical codes.
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
1 2
ON
10’s
1’s
Rotary Switches
(00-99)
Example: Node
Address is set at 26
43112
DIP Switches
(100-125)
View when looking into module.
100’s